Categories

چهار راهي پنوماتيک

QUICK OVERVIEW

This 90-degree Union Cross with mounting holes is a metric composite body push-to-connect fitting. The cross fitting has four openings positioned at 90-degrees from each other for connecting and branching four tubes. It has push-to-connect metric tube connections on all four ends. This fitting is very strong and flexible, has excellent abrasion resistance, is lightweight, and resists crushing and cracking.

Compare

Markets

Pneumatic

Industrial

Robotic

Automation

Printing

Semi-conductor

Applications

Air lines

Intert Gases

Cutting Fluids

Vacuum

Rastinkar Hydraulic offers plastic push in fittings , which is also called pneumatic fittings for it usually being used in pneumatic systems. It is made from Acetal copolymer, with a stainless steel collect design that ensures high quality clamping with various types of tube such as nylon tubes, polyethylene tubes and polyurethane tubes. It can be easily connected or disconnected by one touch and is used for a wide variety of models to meet all demands. And its oval sleeve also makes it possible to apply and remove the tube easily in confined space.  These fittings typically disconnect via some type of collar retraction. Quick connections are convenient for sections of the system requiring frequent disconnection and reconnection.

For use with the following tubing

Polyethylene

Nylon

Semi-rigid nylon

Fluoropolymer

To Connect

Simply push the tube inside of the fitting

To Disconnect

Press down the plastic sleeve; then pull the tube out.

Additional Information

Sizes

4 mm – 16 mm

Working pressure

,

Temperature Range

0—60°C, 32~140°F

Applicable Tube

PU / PA / PE / PVC

Fluid Admitted

Air, Vacuum, Water(no freezing)

چهار راهي پنوماتيک

QUICK OVERVIEW

This 90-degree Union Cross with mounting holes is a metric composite body push-to-connect fitting. The cross fitting has four openings positioned at 90-degrees from each other for connecting and branching four tubes. It has push-to-connect metric tube connections on all four ends. This fitting is very strong and flexible, has excellent abrasion resistance, is lightweight, and resists crushing and cracking.

Compare

Markets

Pneumatic

Industrial

Robotic

Automation

Printing

Semi-conductor

Applications

Air lines

Intert Gases

Cutting Fluids

Vacuum

Rastinkar Hydraulic offers plastic push in fittings , which is also called pneumatic fittings for it usually being used in pneumatic systems. It is made from Acetal copolymer, with a stainless steel collect design that ensures high quality clamping with various types of tube such as nylon tubes, polyethylene tubes and polyurethane tubes. It can be easily connected or disconnected by one touch and is used for a wide variety of models to meet all demands. And its oval sleeve also makes it possible to apply and remove the tube easily in confined space.  These fittings typically disconnect via some type of collar retraction. Quick connections are convenient for sections of the system requiring frequent disconnection and reconnection.

For use with the following tubing

Polyethylene

Nylon

Semi-rigid nylon

Fluoropolymer

To Connect

Simply push the tube inside of the fitting

To Disconnect

Press down the plastic sleeve; then pull the tube out.

Additional Information

Sizes

4 mm – 16 mm

Working pressure

,

Temperature Range

0—60°C, 32~140°F

Applicable Tube

PU / PA / PE / PVC

Fluid Admitted

Air, Vacuum, Water(no freezing)