Categories

اتصال مستقيم داخل دنده پنوماتيک

QUICK OVERVIEW

BSP Female accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tube O.D Ranging from 1/8″ to 1/2″ and Thread Ranging from M5, M6, BSPT 1/8 to BSPT 1/2. Pneumatic fittings female swivel elbow is widely used to connect tubing at a 90° angle to a male threaded port. External tightening with a flat wrench.

Compare

Markets

Pneumatic

Industrial

Robotic

Automation

Printing

Semi-conductor

Applications

Air lines

Intert Gases

Cutting Fluids

Vacuum

Rastinkar Hydraulic offers plastic push in fittings , which is also called pneumatic fittings for it usually being used in pneumatic systems. It is made from Acetal copolymer, with a stainless steel collect design that ensures high quality clamping with various types of tube such as nylon tubes, polyethylene tubes and polyurethane tubes. It can be easily connected or disconnected by one touch and is used for a wide variety of models to meet all demands. And its oval sleeve also makes it possible to apply and remove the tube easily in confined space.  These fittings typically disconnect via some type of collar retraction. Quick connections are convenient for sections of the system requiring frequent disconnection and reconnection.

For use with the following tubing

Polyethylene

Nylon

Semi-rigid nylon

Fluoropolymer

To Connect

Simply push the tube inside of the fitting

To Disconnect

Press down the plastic sleeve; then pull the tube out.

اتصال مستقيم داخل دنده پنوماتيک

QUICK OVERVIEW

BSP Female accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tube O.D Ranging from 1/8″ to 1/2″ and Thread Ranging from M5, M6, BSPT 1/8 to BSPT 1/2. Pneumatic fittings female swivel elbow is widely used to connect tubing at a 90° angle to a male threaded port. External tightening with a flat wrench.

Compare

Markets

Pneumatic

Industrial

Robotic

Automation

Printing

Semi-conductor

Applications

Air lines

Intert Gases

Cutting Fluids

Vacuum

Rastinkar Hydraulic offers plastic push in fittings , which is also called pneumatic fittings for it usually being used in pneumatic systems. It is made from Acetal copolymer, with a stainless steel collect design that ensures high quality clamping with various types of tube such as nylon tubes, polyethylene tubes and polyurethane tubes. It can be easily connected or disconnected by one touch and is used for a wide variety of models to meet all demands. And its oval sleeve also makes it possible to apply and remove the tube easily in confined space.  These fittings typically disconnect via some type of collar retraction. Quick connections are convenient for sections of the system requiring frequent disconnection and reconnection.

For use with the following tubing

Polyethylene

Nylon

Semi-rigid nylon

Fluoropolymer

To Connect

Simply push the tube inside of the fitting

To Disconnect

Press down the plastic sleeve; then pull the tube out.